Basic components of the notebook computer maintenance tips

1, The Laptop LCD Screen (LCD Panel)
A long time without using a computer, via the function keys on the keyboard temporarily only LCD screen, power off, screen life can be extended in addition to save power.
* Do not force the cover of the LCD screen cover on the screen or put any foreign objects in between the keyboard and display screen, to avoid the cover glass due to the weight and cause damage to internal components.
* Do not touch the screen surface to avoid scratching fingernails and sharp objects (hard objects).
* LCD screen surface will attract dust due to static electricity, it is recommended to buy the LCD screen cleaning cloth to clean your screen, do not shoot except to avoid leaving fingerprints with your fingers, and gently wipe.
* Do not use chemical cleaners to clean the screen.
2, The Laptop Battery (Batteries)
* When no external power supply, if the working conditions at the time temporarily use the card in less than a PCMCIA slot, it is recommended to remove the card first in order to extend battery life.
Room temperature (20-30 degrees) is the most suitable battery operating temperature, the temperature is too high or too low operating environment will reduce the battery usage time.
The use of laptop computers in the environment can provide a stable power supply, remove the battery for longer battery life by life is not correct. Asus notebooks, when fully charged battery, the battery charging circuit will automatically shut down, so it will not overcharge phenomenon.
* Suggest that the average of three months for a battery power correction action.
* Power Adapter (AC Adapter) when used with reference to international voltage Help
3, The Laptop Keyboard (Keyboards)
Accumulated dust, used a small brush to clean the cracks, or use high-pressure jet cans generally clean the camera lens, blow the dust, or use a handheld vacuum cleaner to remove dust and debris on the keyboard.
* Clean surfaces coated with a little detergent on a soft cloth, gently wipe the keyboard surface in the case of shutdown.
4, The hard disk (Hard Disk)
* In stable condition as far as possible, avoid operating the computer easy to shake locations.
* Switch machine process is the hard disk most vulnerable time. Hard bearings is not yet speed is not yet stable, if vibration is likely to cause bad sectors. The recommended shutdown after waiting about ten seconds or so after the mobile notebook.
* Average monthly to perform a disk reorganization and scanning to enhance the efficiency of disk access.
5 Floppy Drive
* To avoid the adverse appearance or mildew the floppy disk.
* Buy a floppy drive cleaning tablets, and regular cleaning of the read-write heads.
6, CD-ROM
* Use the disc cleaning tablets, periodically clean the laser lens.
* Hands and land the disc into your CD-ROM drive, a hand CD tray in one hand the CD piece is really fixed, can avoid the deformation of the CD tray.
7, The touchpad
* Always keep your hands clean when using the touchpad, so as to avoid a run around the phenomenon of the cursor.
* Careless dry cloth moistened corner of the dirty surface, gently wipe the surface of the touchpad can, do not use a rough cloth and other items to clean the surface.
* Touchpad is the induction of precision electronic components Do not use sharp objects to write on the touch panel, also can not use the weight, so as not to cause damage.
8, Thermal Dissipation(cpu fan)
* In general, notebook computer manufacturers through the fan, heat duct (Heat Pipe), a large heat sink, cooling holes, such as to reduce the use of heat generated.
* To save power and to avoid the noise, the laptop fan is not always functioning, but when the CPU reaches a certain temperature, the fan will start.
* The laptop is placed in the soft goods, such as: bed, sofa, may block ventilation openings affect the cooling effect and thus reduce operating performance, or even crash.
9, Maintenance of other components
Before cleaning and maintenance, be sure your notebook computer and related peripheral equipment maintenance in accordance with the following steps:
* Step one: turn the power off and remove the external power cord, removal of internal battery and all external devices connected line.
* Step 2: with a small vacuum cleaner connector, keyboard cracks and other parts of the dust sucked.
* Step Three: slightly moistened with a dry cloth and then gently wipe the cabinet surface, live in Italy ten million trickle Do not use any cleaning agents inside the machine to avoid a short circuit burned.
* Step Four: Wait for the notebook computer is completely dry in order to turn the power on.